Bosch Appliances NWC-0700, NWC-0900, NWC-0800 Camera installer, Bosch Camera Installer Basic mode

18 en Software MegaPixel IP Cameras

4.1.3Camera installer

Camera Installer allows you to find all cameras that are present on the local area network, assign IP addresses to the detected cameras, and to verify that the cameras are accessible and operational. Camera Installer saves information about installed cameras into a dedicated file used by Video System. Camera Installer supports two modes of operation - Basic and Advanced.

–Basic mode - In this mode, Camera Installer detects all cameras that are within range of the broadcast request (all cameras within the network segment of the host PC) and automatically assigns IP addresses to the cameras. It selects those addresses that belong to the same sub-net- work as the host PC itself and not yet assigned to other network cameras. To detect and install the cameras auto- matically, the user should simply press the Automatic but- ton in the Basic mode. The installer will find, configure, and verify the operability of the cameras, and will report installation results as shown below. Once installation is complete, the user should press the Save/Exit button to save the setup information and exit the Installer.

Fig. 4.3 Bosch Camera Installer - Basic mode

–Advanced mode - In this mode, the user can detect all cam- eras present on the local area network and choose one or more cameras for the installation. Furthermore, Advanced mode allows you to issue the IP numbers of the cameras

F.01U.064.422 V 1.0 2007.03 User Manual Bosch Security Systems