Bosch Appliances NWC-0900, NWC-0800, NWC-0700 manual En Safety MegaPixel IP Cameras

Models: NWC-0800 NWC-0900 NWC-0700

1 46
Download 46 pages 21.55 Kb
Page 6
Image 6

4 en Safety

MegaPixel IP Cameras

 

 

10.Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.

For external power supplied units, use only the recom- mended or approved power supplies.

For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.

For 9-12 VDC units, voltage applied to the unit's power input should not exceed 12.3 VDC. User-supplied wiring must comply with local electrical codes (Class 2 power lev- els). Do not ground the supply at the terminals or at the unit's power supply terminals.

If unsure of the type of power supply to use, contact your dealer or local power company.

11.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other haz- ards. Refer all servicing to qualified service personnel.

12.Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any dam- age to the equipment has occurred, such as:

the power supply cord or plug is damaged;

exposure to moisture, water, and/or inclement weather (rain, snow, etc.);

liquid has been spilled in or on the equipment;

an object has fallen into the unit;

unit has been dropped or the unit cabinet is damaged;

unit exhibits a distinct change in performance;

unit does not operate normally when the user correctly fol- lows the operating instructions.

13.Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteris- tics as the original parts. Unauthorized substitutions may cause fire, electrical shock, or other hazards.

14.Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition.

15.Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.

16.Attachments, changes or modifications - Only use attachments/acces- sories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warrantee

F.01U.064.422 V 1.0 2007.03

User Manual

Bosch Security Systems

Page 6
Image 6
Bosch Appliances NWC-0900, NWC-0800, NWC-0700 manual En Safety MegaPixel IP Cameras