Bosch Appliances NWC-0800, NWC-0900, NWC-0700 manual MegaPixel IP CamerasSoftware en

MegaPixel IP CamerasSoftware en 29

mitting the images to the computer. Thus, the in-camera motion detection significantly reduces both the CPU load and the network load when motion detection is enabled.

–Motion detection is enabled via the Archive settings when one of the two following options is selected: "Save all and mark motion" or "Save only motion." If the Archive is enabled for "Save all frames", motion detection is disabled. The Enabled/Disabled status is displayed in the bottom right corner of the Motion Settings window.

–Motion detection is computed independently in multiple detection zones on a square grid. The largest grid sup- ported for any Bosch camera model and image size is 8 by 8. The actual grid for any particular model is determined by the chosen zone size (a drop-down list in the lower right corner of the Motion Settings screen) and the camera's pixel resolution. The actual grid is displayed in the lower left corner. When motion is present, the Motion Settings window displays green marks (selectable between crosses and boxes) in the zones affected.

–Motion detection can be masked to block motion detection in some of the zones by drawing a rectangle with the mouse (by left-clicking and holding down the mouse but- ton). The masked areas are marked with red crosses. A more complex shape can be created by drawing multiple rectangles. Erasing the mask (or part of the mask) is done by drawing a rectangle with the right mouse button.

Bosch Security Systems User Manual F.01U.064.422 V 1.0 2007.03