Plena Mixer AmplifierInstallation en 15
5 | Installation | |
5.1 | Unpack unit | |
| 1. | Remove the unit from the box, and discard the packaging material according to local |
|
| regulations. |
| 2. | Use your fingernails to carefully peel off the protective plastic film from the label holders. |
|
| Do not use sharp or pointed objects. |
5.2 | Check settings/connections | |
| 1. | Connect any additional equipment (see Section 6.1 Connecting inputs and |
|
| Section 6.2 Connecting outputs). |
| 2. | Check the settings (see Section 7.1 Unit settings). |
5.3 | Connect unit to mains | |
|
| |
| CAUTION! | |
| Before connecting power, always check the voltage indicator plate at the rear of the unit. | |
|
|
|
| 1. | Make sure the power switch on the front of the unit is set to Off. |
| 2. | Connect the power cord to the mains connector and plug it into the mains outlet. |
Figure 5.1 Power connection and voltage selector
Bosch Security Systems B.V. | Installation and Operation manual |
|
