For Wood Stud Walls drill three 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm) into stud center. 
Attach wall arm (W) using three #14 x 2.5" (6 mm x 65 mm) wood screws (V).
WARNING
•Tighten wood screws so wall arm is firmly attached, but do not tighten with excessive force! Overtightening can cause stress damage to wood screws, greatly reducing their holding power. Tighten to 80 in • lb (9 N.M.) maxi- mum torque.
WOOD
STUD
WALL
W
V
5 of 12 | ISSUED: |
