Bosch Appliances UNPM 3.0DESCRIPTION, 4.0INSTALLATION, 5.0CAMERA/LENS ADJUSTMENT, 6.0SUNSHIELD

Models: UNPDN UNPM UNPXF UNPC

1 12
Download 12 pages 46 Kb
Page 8
Image 8
3.0DESCRIPTION

UNPM, UNPC, UNPDN, UNPXF Series Instruction Manual Description

EN 8

 

 

3.0DESCRIPTION

The UNPM Series, UNPC Series, UNPDN Series, and UNPXF Series are complete camera packages that include a camera/lens pre-wired into a housing. A feed-through wall mount is also provided, as well as a sunshield on outdoor packages.

3.1Model Summary

Refer to APPENDIX A for the resolution, lens, and system specifications for the various package models.

4.0INSTALLATION

WARNING: This installation should be made by a qualified service person and conform to all local codes.

4.1Operating Voltage

All Recommended operating voltage is 24 VAC, 60 Hz.

4.2Preparing the Unit

Remove the mount and the housing assembly from the carton.

4.3Mount

Prepare and secure the mount to the wall or mounting surface as described in the LTC 9215/00 Installation Manual included in the Instruction Booklet Packet.

4.4Housing

Feed the cabling from the housing foot through the mount. Attach the housing to the mount using the two (2) M6 screws and washers provided in the hardware kit. For additional information, refer to the LTC 9215/00 Mount Installation Manual and HSG9483 Series Housing Installation Manual.

4.5Line Power and Video Signal

Connection

The external video coax cable is equipped with a female BNC connector for transmission of video. Route and connect video cable to the BNC connector. The external power cable is provided to allow for necessary stripping/preparation by the installer. For additional information, refer to the Installation Manuals included in the Instruction Booklet Packet.

4.6Connections for F Suffix and

N suffix Cameras

The connections for models containing fiber optic or twisted pair interfaces are covered in a separate Installation Instruction Addendum that is provided with those model types.

5.0CAMERA/LENS

ADJUSTMENT

The camera and lens come factory configured and ready for operation. If custom setup is required, refer to the camera Installation Instructions included in the Instruction Booklet Packet.

Outdoor models that include the LTC 3374/50

5-50 mm lens are supplied with a lens support bracket that protects the lens during shipment. If necessary, this bracket can be removed to allow access for lens adjustment. To remove the bracket, cut the cable tie and remove the screw as shown in the photo below.

6.0SUNSHIELD

A sunshield is provided with the outdoor packages.

Bosch Security Systems May 5, 2006

Page 8
Image 8
Bosch Appliances UNPM 3.0DESCRIPTION, 4.0INSTALLATION, 5.0CAMERA/LENS ADJUSTMENT, 6.0SUNSHIELD, 3.1Model Summary, 4.3Mount