![](/images/new-backgrounds/1265902/26590233x1.webp)
Ultra Electronics Card Systems | Quick Start Guide |
Install the parallel Interface Cable H and Ultra Secure Key
12
Switch the printer OFF. Locate the Parallel Interface connector on the rear panel.
Note the position for the Ultra Secure Key at the rear of the Magicard Printer.
Plug a good quality, screened Centronics Interface cable into this socket and secure the wire latches. Plug the other end into the Printer connector of your PC (LPT1 or LPT2)
3
MAGICARD Color Printer | Page 17 |