![](/images/new-backgrounds/1265902/26590227x1.webp)
Quick Start Guide | Ultra Electronics Card Systems |
Connect the Printer
F to a Power Supply
12
Locate the Mains Voltage Selector Switch on the rear panel and check that it is correct for your country - select 115V or 230V.
3
Locate the ON/OFF Switch and check that it is in the OFF position.
4
Plug in the Power Cord. Plug the other
end into a Power Supply socket.
Switch ON. The indicators should all flash and the motors run briefly. Finally, the POWER ON and ON LINE will remain ON.
Page 14 | MAGICARD Color Printer |