![](/images/new-backgrounds/1265902/26590241x1.webp)
Ultra Electronics Card Systems | Quick Start Guide |
∙After about 30 seconds, the Printers window appears and the PrintMagic MAGICARD Printer on LPT1 should have been added to the Installed Printers list.
Press the Set as Default Printer button.
DO NOT check the Use Print Manager check box. Select the Close button.
Close the Control Panel window.
NOTE: The above procedure assumes that the floppy disk drive on your PC is Drive A and also that the printers parallel port on the PC is LPT1. Change the settings if appropriate.
MAGICARD Color Printer | Page 21 |