Ultra electronic 300plus quick start Test Printer Operation G

Ultra Electronics Card Systems Quick Start Guide

Test the

Printer Operation G

Print an Internally-Generated Test Card to make sure your printer is working correctly:

12

At the rear of the printer, locate the TEST Push-button. This is located in the rear panel, just above the Centronics parallel interface connector.

In early models, it may be located through a small hole in which case it may be operated by means of a small insulated screwdriver, match-stick or blunt cocktail stick.

Press the push-button momentarily.

It will take a few seconds before printing commences. When finished, a Test Card will be ejected from the aperture in the Front Panel.

3

The card should be as shown, with Yellow-Magenta-Cyan-Black panels, a Cyan background and Yellow-Magenta- Cyan graduated scales. This card can only be printed by a printer in isolation, when using UR1 Dye Film. Note also that

MAGICARD Color Printer Page 15