![](/images/new-backgrounds/1265902/26590223x1.webp)
Quick Start Guide | Ultra Electronics Card Systems |
E
1
Load the
Plastic Cards
2
Flex a stack of plastic cards, to make sure they are not 'stuck' together. Avoid touching the surfaces to be printed.
3a
Remove the 'tacky' roller before each batch of 100 cards, by putting your fingers beneath it and "snapping" out the left hand end of the roller. Remove surface dust by using a strip of 'Scotch' adhesive tape, and "snap" back into place.
Drop the cards flat down into the plastic Cassette, side to be printed uppermost, mag stripe to the left and facing down (if used).
3b
Page 12 | MAGICARD Color Printer |