5 en Installing and Connecting | VIP X1600 XFM4 |
|
|
4Installing and Connecting
4.1Installing Modules
–Insert the module into the guide rails of the first slot and carefully push as far as it will go. If the first slot is already equipped you can equip one of the other unused slots.
–First, remove the respective cover plate by unscrewing the screw and bending the cover plate upwards.
–Insert the four screws provided in the bores on the module and tighten.
–After a module has been removed, you must reseal the empty slot with a cover to ensure correct air circulation.
F.01U.088.580 V4.0 2009.03 | Quick Installation Guide | Bosch Security Systems |