Bosch Appliances WFD50818 Electrical connection, Installation Instructions

Installation Instructions 33

Electrical connection

When heating, the maximum current of the washing mach- ine is 10A, so please make suer that the power supply sys- tem (voltage, current and cable) is applicable to the load of the applied appliance.

The machine must only be connect to an alternating curr- ent supply via a correctly installed earthed socket.

The voltage indicated on the rating plate at the back of the machine must match the mains voltage at the installation location.

Connected load and required fuse or line protecting cut-out are indicated on the rating plate.

It must be ensured that the plug and socket match, that the conductor cross-section is sufficient and that the earthing system has been installed in compliance with regulations.

Multiple plug connectors and extension cables must not be used.

Do not connect the machine to electrical outlets while your hands are wet or damp.

To remove the plug from the socket, grasp the plug firmly and pull it out. Do not pull at the cable.

If the supply cord is damaged, it will be replaced by a spe- cial cord or a assembly available from the manufacturer or its service agent.-

In the event that an earth-leakage circuit breaker is to be used, only use types marked with the following symbol:

. Only this symbol can guarantee compliance with all current regulations.