Operating Instructions | 23 |
Trouble Shooting Minor Faults
Risk of electric shock
Repairs must only be carried out by our Customer Service or an authorized technician.
If repairs are needed, and assuming that you cannot elim-
inate the fault youself with the aid the following table:
,,
Turn the programme selector to ,,Off .
Disconnect the washing machine from the mains.
Turn off the water tap.
Call Customer Service.
Fault |
| Possible cause |
The loading door cannot |
| There is water in drum. |
| ||
be opened. |
| Safety function is active. |
|
| |
Detergent residue in the |
| Detergent was damp or |
detergent dispenser. |
| lumpy. |
The gasket is crimped. |
| This may appears after |
|
| installing the transport bolts. |
The belt gets off the pulley. |
| Too much laundry is in the |
|
| drum or the laundry is put |
|
| in badly, and close the |
|
| window with excessive force. |
Control lights do not |
| A fuse has triggered. |
come on. |
|
|
|
| Power failure. |
|
| Plug is loose or not inserted. |
Ready/Wash and Rinse |
| Loading door not closed. |
control lights flash. |
| |
|
| |
The programme |
| Loading door not closed. |
does not start. |
| ,, |
|
| ,,Start/Pause button does |
|
| not pressed. |
Water does not enter the |
| Water tap not turned on. |
machine or detergent is |
| |
|
| |
not wash away. |
| Strainer in supply hose |
Ready/Wash and Spin/ |
| clogged. |
End control lights flash. |
|
|
|
|
|
Action
Select ,, Spin ,,.
Wait for 2 minutes.
Clean and dry the detergent dispenser(refer to Page 21)
Use the dispensing aid for liquid detergent.
Remove the transport bolts, operate the machine for a period of time, the gasket will return to the original shape.
Put in the laundry well and according to the maximum load specification.
Switch on/replace the fuse.
Call Customer Service if this fault is repeated.
An interrupted program will be resumed when power returns. If you wish to unload the laundry, proceed as in Cleaning the drain pump , Page 20.
Insert the plug.
Check whether laundry is trapped in door.
Close the loading door(a click sh- ould be heard).
Same solution as above.
,,
Press the ,,Start/Pause button.
Turn on water tap.
Clean the strainer (refer to Page 21)
