Operating Instructions | 21 | |
2. | 1. |
|
|
| |
(WFD50818) |
|
|
(WFD50810)
(WFD50818)
Carefully remove the pump cap. But do not fully remove it and allow a little more residual water flow into the suitable container.
Remove the pump cap.
Remove any loose debris/fluff from inside the pump and clean the pump. The pump impeller must be able to rotate. Clean any residual suds or fluff from the thread of the pump cap and pump housing.
Attach and tighten the pump cap.
Attach and close the cover plate.
To avoid unused detergent from flowing into the drain during the next wash cycle:
Pour 1 litre of water into chamber II
Select the,,Spin,,programme.
Cleaning water inlet strainers
This necessary if very little or no water flows into the washing machine.
First release the water pressure in the supply hose:
Turn of the water tap.
Turn the programme selector to any programme. (Except ,,Spin,,)
Press the ,, Start/Pause,, button, and allow the programme to run for approx.40 seconds.
