![4Configuration](/images/new-backgrounds/46068/4606835x1.webp)
18 en Configuration | WZ16 Integrated IR Bullet Camera |
|
|
4Configuration
Follow the steps below to adjust the zoom and focus. Remove the lens cap before making adjustments, then replace it when you finish. Refer to the figure below.
Figure 4.1 Lens adjustment
Number Description
1Zoom control
2 Focus control
3 Video brightness
CAUTION!
To prevent humidity problems, the camera must be installed in dry conditions. Removing the lens cap in a wet or humid environment may result in condensation on the front window.
4.1Adjusting the Zoom
1.Loosen the Zoom lock screw by turning it counterclockwise.
2.Adjust the zoom by moving the Zoom lever to Tele side or Wide side.
3.Turn the Zoom lock screw clockwise to tighten the focus lever after adjustment.
1.0 2011.02 | Installation Manual | Bosch Security Systems, Inc. |