WZ16 Integrated IR Bullet Camera | Installation and Connection en 15 |
|
|
3Installation and Connection
DANGER!
RISK OF ELECTRIC SHOCK! DO NOT OPEN THE UNIT!
WARNING!
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the following installation instructions.
CAUTION!
Do not install the camera near electric or magnetic fields. If possible, do not install in a kitchen or boiler room as heat will affect the camera.
CAUTION!
Do not use a power source other than the one specified. An unregulated power supply cancause damage to the camera. Use of an unregulated power supply will void the productwarranty.
1.Select a mounting surface that is strong enough to support the camera.
2.Connect the camera to either a 12VDC (recommended for best picture and the most stable camera operation) or 24 VAC regulated power supply.
3.Face the camera away from the sun or any bright or reflective light. Excess light on the lens may cause smear on the picture and possible damage to the CCD.
CAUTION!
To prevent humidity problems, the camera must be installed in dry conditions, and the cable leads should be sealed once connected.
Bosch Security Systems, Inc. | Installation Manual | 1.0 2011.02 |
