Latch Connector

P/N 212047

Owner’s Manual - Regal Intensive Care Unit

There is one latch connector on each animal compartment door. The two latch connectors are identical and are removed and installed the same way. The latch connectors can be replaced without removing the doors from the unit.

Tool Required

Phillips screwdriver

Removal

1.Open the door so that the latch connector is completely dis-engaged from the top and bottom latch brackets.

2.With a Phillips screwdriver, remove the two cap screws that secure the bottom latch connector holder (Figures 86

and 87) and remove the holder from the unit.

3.Remove the two cap screws that secure the top latch connector holder and remove the holder and the latch connector from the door.

Latch

Connector Latch

HoldersConnector

Figure 87. Latch Connector & Holders

Installation

1.Hold the latch connector and the top latch connector holder in place on the door and secure with the two cap screws.

Note: The locating pins in the latch connector (Figure 86) should ride above the top latch connector holder, and under the bottom latch connector holder.

2.Secure the bottom latch connector in place with the two cap screws.

3.Try closing and latching the door several times to make sure the latch connector operates correctly.

Form No. 702718 Rev. A March, 2005

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.

Suburban Mfg 12019-01-NGFREP manual Latch Connector & Holders Installation

Models: 12019-01-NGFREP