Installation Setup, Overview | Suburban Mfg 12019-01-NGFREP instruction

Chapter 3 - Installation & Setup

Installation and

Setup

Overview

Installing and setting up the Regal Intensive Care Unit is a twelve step process:

1.	Assembling and Placing the Base -	Page 34
2.	Mounting the Intensive Care Unit -	Page 34
3.	Installing the Fuel Cell -	Page 35
4.	Connecting Electrical Power -	Page 37
5.	Checking the Heating Function -	Page 38
6.	Checking the Cooling Function -	Page 39
7.	Checking Floor Heat (Left) -	Page 40
8.	Checking Floor Heat (Right) -	Page 40
9.	Checking the Oxygen System -	Page 41
10.	Checking theAlarm Function -	Page 42
11.	Connecting the Oxygen Supply -	Page 43
12.	Filling the CO2 Filter -	Page 44

Installation Requirements

Assembling and Placing the Base

Electrical Requirements

The Regal Intensive Care Unit requires a dedicated, minimum 15-amp, 120 VAC, 60 Hz. source of electrical power.

Oxygen Requirements

The Regal Intensive Care Unit requires a regulated source of oxygen. SSCI recommends an intake pressure of 10 to 20 psi with a flow rate of 15 lpm. Your experience may indicate that a greater or lesser pressure and/or flow rate are desirable.

If the Intensive Care Unit is to be mounted on an SSCI mobile or cabinetry base, unpack and assemble the base first. Refer to the assembly instructions packed with the base. If an SSCI base is not going to be used, fully prepare the area where the Intensive Care Unit will go so that it is ready to receive the unit.

Mounting the Intensive Care Unit

After the Regal Intensive Care Unit is fully unpacked and all parts accounted for, place the unit on the base or in its intended location.

CAUTION: Leave a minimum of six-inches clearance between the rear of the unit and any wall or other surface to allow sufficient airflow to the fan and cooling coils, and for access to the electrical and oxygen connections.

34	SSCI - Suburban Surgical Company, Inc.

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.

Suburban Mfg 12019-01-NGFREP manual Installation Setup, Overview, Mounting the Intensive Care Unit

Models: 12019-01-NGFREP