Owner’s Manual - Regal Intensive Care Unit

14.With a 1/2-in. wrench, remove the nut behind the knob.

15.Remove the nut and internal-star washer from the shaft.

16.Open the electronics compartment door.

17.Pull the complete control assembly out of the door.

Installation

1.From inside the door, place the shaft of the new tempera- ture control through its opening. Make sure it is oriented like the other control assembly.

2.Close the electronics compartment door.

3.Place the internal-star washer on the shaft and secure the assembly in place with the 1/2-in. nut.

4.Turn the shaft fully counter-clockwise.

5.Mount the knob onto the shaft with the indicator line at about the 9:00 position (pointing left), and secure the knob with the lock screw.

6.Open the electronics compartment door.

7.Re-connect the ribbon cable to Terminal P1. The wire with the red stripe should be on top.

8.Re-connect the single wire to Terminal 2.

9.Re-connect the single wire to Terminal 1.

10.Re-connect the two wires to Terminal 7.

11.Re-connect the single wire to Terminal 6.

12.Re-connect the two wires to Terminal 5.

13.Re-connect the two wires to Terminal 4.

14.Close and secure the electronics compartment door.

15.Plug the power cord into its wall outlet.

Form No. 702718 Rev. A March, 2005

111

Page 123
Image 123
Suburban Mfg 12019-01-NGFREP manual Form No Rev. a March 111

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.