Inside View of Fuse Holder Removal | Suburban Mfg 12019-01-NGFREP

Chapter 5 - Repairs & Replacements

Fuse Holder,

(Floor Temperature,

Left & Right)

P/N 853671

There are two fuse/fuse holder assemblies on the electronics compartment door, one each for left floor temperature and right floor temperature. The fuse holders are identical and are removed and installed the same way.

CAUTION: Before proceeding, make sure the unit is Off, and the electric power cord un-plugged.

Tool and Supplies Required

11/16-in. wrench

Markers, masking tape, tags, or other means to mark wires

Nut

Side

Terminal

Rear

Terminal

Figure 121. Inside View of Fuse Holder

Removal

1.Make sure that the main on/off switch is Off and the amber light in the switch is out.

2.Unplug the power cord from the electrical outlet.

3.Open the electronics compartment (refer to Page 57).

4.Mark both wires on the rear of the fuse holder so that you can re-install them correctly.

5.Dis-connect both wires from the fuse holder. Note: There are

two terminals on the fuse holder: one on the side and one on the rear (Figure 121).

6.With a 11/16-in. wrench, unscrew and remove the nut holding the fuse holder to the door.

7.Pull the fuse holder out through the front of the door.

8.If the fuse is still good, you can remove the it from the fuse holder and re-use it.

108	SSCI - Suburban Surgical Company, Inc.

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.

Suburban Mfg 12019-01-NGFREP manual Fuse Holder Floor Temperature Left & Right

Models: 12019-01-NGFREP