Chapter 4 - Operation and Care

Cooling the

Compartment Air

If cooling is required by animals in both half-compartments, use the wire grill divider so that air can move freely between the compartments. If only one animal requires coolong, and is small enough to fit, place it in the right compartment, and install the acrylic divider (the right compartment contains the air inlet).

To supply cooled air to the animal compartment:

1.Install a divider panel if required, (refer to Page 49).

2.Make sure the main on/off switch is On. The amber light in the switch must be On (refer to Page 48).

Temperature

Set Dial

System On/Off

Light Switch

Figure 57. Cooling Controls

3.Press the cooling on/off switch to turn coolingOn.Theamberlightintheswitch comes on (Figure 57).

4.Turn the temperature set dial to the desired temperature. If the temperature in the compartment is above the set temperature, cooling is supplied and the red system light comes on. The temperature of the air in the animal compartment can be read on the digital readout (refer to

Page 24).

When the compartment air reaches the set tempera- ture, the system light goes out.

To turn cooling Off, press the cooling on/off switch. The light in the switch goes out. If the cooling system was operating, it stops, and the system light goes out.

54

SSCI - Suburban Surgical Company, Inc.

Page 65 Page 67
Page 66
Image 66
Suburban Mfg 12019-01-NGFREP manual Cooling Compartment Air, Cooling Controls
Page 65 Page 67

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents