Chapter 5 - Repairs & Replacements

3.Mount the fan in place and secure with the four screws.

4.Mount the rear utility panel and secure with the eleven screws.

5.Plug the power cord into its wall outlet.

Alarm Time Delay Relay

P/N 853416

Procedure

1.Make sure that the main on/off switch is Off and the amber light in the switch is out.

2.Open the electronics compartment (refer to Page 57).

3.Pull the alarm time delay relay out of the octal base (Figure 142).

4.Note: An alignment tab on the time delay relay center post matches a slot in the octal base (Figures 143 and 145). Making sure that the tab and slot align, push the new relay fully into place on the octal base.

5.Refer to Setting the Alarm Time Delay Relay on Page 59 and set the relay to the delay you prefer.

6.Close and secure the electronics compartment door.

Center Post

Alignment

Tab

Octal Base

Time Delay Relay

 

 

 

 

 

Figure 142. Time Delay Relay

 

Figure 143. Time Delay Relay Alignment

 

 

 

Tab

124

SSCI - Suburban Surgical Company, Inc.

Page 135 Page 137
Page 136
Image 136
Suburban Mfg 12019-01-NGFREP manual Time Delay Relay Alignment
Page 135 Page 137

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents