Owner’s Manual - Regal Intensive Care Unit

4.Remove the fuel cell.

5.Dispositionofthefuelcell:

„Ifyouaretransferringtheexistingfuelcelltothenew oxygen sensor, put the cell aside for re-installation.

„If you are going to use a new fuel cell, discard the old cell.

Dispose of used fuel cells in accordance with local, state, and Federal regulations.

6.Locate the rear of the oxygen concentration meter on the inside of the electronics compartment door (Figure 100).

Note: Terminal numbers are displayed on the rear of the meter by molded-on, raised numbers.Also, a label showing terminal numbers is affixed to the top of the body of the meter.

Rear of

Oxygen

Conc.

Meter

Spiral Cord

Terminal 1

Terminal 2

Terminal 3

Spiral

Cord

Wire Tie

Figure 100. Inside of Electronics

Figure 101. Oxygen Sensor Wire

Compartment Door

Connections on the Rear of the Oxygen

 

Concentration Meter

7.

Cut and remove the wire tie holding the wires from the

 

spiral cord to the wire on Terminal 3 (Figure 101).

8.

With a flat-blade screwdriver, disconnect the two white

 

wires from the spiral cord to Terminal 1 on the back of the

 

meter. Do not disturb the other wire on the terminal.

9.

Disconnect the white and black wires from the spiral cord to

 

Terminal 2. Do not disturb the other wire on the terminal.

10.

Remove and discard the old oxygen sensor and spiral cord.

Form No. 702718 Rev. A March, 2005

89

Page 101
Image 101
Suburban Mfg 12019-01-NGFREP manual Inside of Electronics

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.