Chapter 5 - Repairs & Replacements

5.Pull all the wire spade connectors off the rear of the switch (Figure 112).

6.The switch is held into the door by four, thin, curved, plastic retaining tabs, two on top the switch, and two below. Squeeze all four tabs down and push the switch out through the front of the door.

Retaining Tabs (2 top, 2 bottom)

Oxygen On/Off Switch shown

UL

Top

UR

Term. 12

Term. 25

 

LL

 

LR

Term. 11

 

Term. 24

Temp. 13

 

Term. 26

(not used)

 

(not used)

Figure 112. Inside View - Typical On/Off

Figure 113. Rear View of On/Off Rocker

Rocker Switch

Switch

Installation

 

1.Examine the rear of the switch and locate Terminals 12 and 25 (Figure 113). The switch must be installed with these terminals on top.

2.Check the front of the switch. Make sure that the lower part of the switch is depressed (Off position).

3.With Terminals 12 and 25 on top, insert the switch into its opening from the front until it snaps into place.

4.Replace the wire spade connectors on the switch terminals.

5.Close and secure the electronics compartment door.

6.Plug the power cord into its wall outlet.

100

SSCI - Suburban Surgical Company, Inc.

Page 111 Page 113
Page 112
Image 112
Suburban Mfg 12019-01-NGFREP manual Inside View Typical On/Off, Rocker Switch Installation
Page 111 Page 113

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents