Chapter 5 - Repairs & Replacements

Solenoid Valve

P/N 853440

CAUTION: This procedure requires opening the oxygen system, and should not be performed by un- trained personnel. Avoid the use of open flames, smoking materials, or equipment capable of producing sparks while performing this procedure.

CAUTION: Before proceeding, make sure the unit is Off, and the electric power cord un-plugged.

CAUTION: Before proceeding, make sure the oxygen supply is turned off at the source.

Tools and Supplies Required

„Phillips screwdriver

„3/4-in. wrench

„11/16-in. wrench

„7/16-in. wrench

„Threadsealingtape

Removal

Solenoid Valve Main Terminal Block

11/16-in.

Nut (inside)

Oxygen Line

Figure 135. Solenoid Valve and Main Terminal Block

1.Make sure that the main on/off switch is Off and the amber light in the switch is out.

2.Unplug the power cord from the electrical outlet.

3.Turn off the oxygen supply at the source.

4.Open the electronics compartment (refer to Page 57).

5.With a 7/16-in. wrench, dis-connect the oxygen line on the rear of the solenoid (Figure 135).

6.Before proceeding, wait 10-minutes to allow any residual oxygen from the system to dissipate.

7.Two wires run from the solenoid to positions 3 and 12 on the main terminal block (Figure 135). With a Phillips screwdriver, dis-connect these two wires from the terminal block.

118

SSCI - Suburban Surgical Company, Inc.

Page 130
Image 130
Suburban Mfg 12019-01-NGFREP manual Solenoid Valve and Main Terminal Block

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.