Chapter 5 - Repairs & Replacements

Meter Mounting Studs

Meter

Bracket

Mounting Stud

(4)

Figure 105. Meter Mounting Studs

Figure 106. Oxygen Concentration Meter

 

and Bracket

Installation

 

1.Put the new meter into its mounting hole in the door so that the four mounting studs pass through their holes (Figure 106).

2.Place two of the nuts removed earlier onto the upper mounting studs and tighten securely.

3.Place the meter bracket on the two lower mounting studs and secure with two nuts/washers removed earlier (refer to Figure 106 for correct orientation of the bracket).

4.Re-connect all ten wires to the oxygen concentration meter (Figure 104). Double-check all connections for tightness and correct terminations.

Note: Plug the spiral cord into the meter, if the plug is present as shown in Figure 103.

5.Re-connect the oxygen sensor wires - refer to Oxygen Sensor - Installation - Steps 1 through 3, on Page 90.

6.Close and secure the electronics compartment door.

7.Using the calibration knob position the calibration needle in the oxygen concentration meter to 20.5%.

8.Plug the power cord into its wall outlet.

94

SSCI - Suburban Surgical Company, Inc.

Page 105 Page 107
Page 106
Image 106
Suburban Mfg 12019-01-NGFREP manual Meter Mounting Studs, Bracket
Page 105 Page 107

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents