106

Chapter 5 - Repairs & Replacements

6.Remove the printed circuit board/display assembly from the rear of the unit.

7.Pull the bezel out from the front of the door (Figure 118).

Installation

1.Place the threaded studs on the new bezel into the four screw holes on the front of the door.

2.Inside the door, place the printed circuit board/display assembly over the four studs on the bezel. The ex- tended tab portion of the circuit board should point down. If you install it with the tab pointing up, the display will be upside-down!

3.Secure the assembly together with the four nuts removed above. Note: Four spare nuts are provided with the new display. None of the other hardware items supplied in the bag assembly will be needed for this installation.

4.Observe the ribbon cable on the 4-wire connector removed in Removal - Step 4 above. Note that one wire has red stripes.

5.Connect the 4-wire ribbon connector to the rear of the display. The wire with the red stripe should be to your right. Note: A new ribbon cable is supplied with the display. You can use the existing cable, or install the new one.

6.Close and secure the electronics compartment door.

7.Plug the power cord into its wall outlet.

106	SSCI - Suburban Surgical Company, Inc.

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.

Suburban Mfg 12019-01-NGFREP manual 106

Models: 12019-01-NGFREP

Installation

12019-01-NGFREP specifications