Chapter 5 - Repairs & Replacements

Panel Latch

P/N 853561

There are four latches on the electronics compartment door and one on the filter/fans compartment panel. These five latches are identical and are replaced the same way.

Tool Required

„11/16-in. wrench

Removal

Nut &

Washer

Latch

Arm

Figure 123. Inside View of Panel Latch

1.Open the electronics compartment (refer to Page 57), or the filter/fans compart- ment (refer to Page 58) as appropriate.

2.Before removing the latch, notice the orientation of the latch arm. With the latch in the “open” position, the arm will point either up or down, depending on its location on the door/panel. The new latch should be oriented the same way.

3.With a 11/16-in. wrench, unscrew and remove the nut and washer holding the latch in place (Figure 123).

4.Remove the latch assembly from the front of the door.

Installation

Note: The latch arm rotates through an arc of about 90°. Install the latch so that it opens when rotated counter-clockwise, and locks when rotated clockwise.

1.Make sure the nut and washer are removed from the new latch.

2.From the front of the panel, insert the latch into its opening.

3.Secure the latch in place with the washer and nut and tighten securely.

112

SSCI - Suburban Surgical Company, Inc.

Page 123 Page 125
Page 124
Image 124
Suburban Mfg 12019-01-NGFREP manual Inside View of Panel Latch
Page 123 Page 125

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents