Chapter 5 - Repairs & Replacements

5.Un-plug the green wire from Terminal 6 on the rear of the temperature control assembly.

6.Un-plug the green and white wires from Terminal 4 on the rear of the temperature control assembly.

7.There are two terminals on the rear of the system light. One terminal has two gray wires, the other has only one. Dis-connect the terminal with the two gray wires.

8.Cut both gray wires off the on/off button spade terminal. Note: Save the spade connector, and take it to your local hardware or electronics supply store for a replacement.

9.Un-screw and remove the knurled ring from the rear of the on/off button.

10.Pull the button and attached wires out through the front of the compartment door and discard the assembly.

to Term 6

Red

Green

 

White

to Term 4

 

Gray

to Fuse

Holderto System Light

Figure 115. Floor Temperature On/Off Button Replacement Part, P/N 212242

Installation

1.On the new button assembly, unscrew the knurled ring and remove it from the assembly.

2.From the outside of the door, pass the connectors, wires and the button body through the mounting hole.

102

SSCI - Suburban Surgical Company, Inc.

Page 113 Page 115
Page 114
Image 114
Suburban Mfg 12019-01-NGFREP manual Red, Gray
Page 113 Page 115

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents