Thermostat

P/N 853421

Owner’s Manual - Regal Intensive Care Unit

CAUTION: Before proceeding, make sure the unit is Off, and the electric power cord un-plugged.

Tools and Supplies Required

Phillips screwdriver

Small flat-blade screwdriver

3/8-in. wrench

11/32-in. wrench

Utility knife or small cutter

Small wire ties (3)

Markers, masking tape, tags, or other means to mark wires

Removal

	Thermostat
	Bracket	Thermostat
	Nuts	Thermostat
	Nuts	Bracket
		Screws

Filter/Fans Comp.

Electronics Comp.

Figure 124. Thermostat Bracket Mounting Screws/Nuts

Cover

Screw

Figure 125. Cover Screw on Thermostat

1.Make sure that the main on/off switch is Off and the amber light in the switch is out.

2.Unplug the power cord from the electrical outlet.

3.Open the electronics compartment (refer to Page 57).

4.Open the filter/fans compartment (refer to Page 58).

CAUTION: When handling Sodalime, observe the CAUTIONS on Page 4.

5.Lift out the Sodalime pan and place it in a safe location.

6.With a Phillips screwdriver and a 11/32-in. wrench remove the two screws/nuts that hold the thermostat bracket to the partition wall (Figure 124).

7.Pull the thermostat and bracket out as far as you can.

8.With a small flat-blade screwdriver, remove the cover screw on the front of the thermo- stat (Figure 125).

Form No. 702718 Rev. A March, 2005

113

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.

Suburban Mfg 12019-01-NGFREP manual Thermostat Bracket Mounting Screws/Nuts

Models: 12019-01-NGFREP