Owner’s Manual - Regal Intensive Care Unit

7

6

5

1

3

9

9

10

2

4

Figure 104. Oxygen Concentration Meter Wire Connections

Note: Terminal numbers are displayed on the rear of the meter by molded-on, raised numbers.Also, a label showing terminal numbers is affixed to the top of the body of the meter.

5.Using tags, masking tape, or any other convenient means, tag each of the remaining ten wires on the meter with the terminal numbers to which they are connected (Figure 104). Notice that there are two wires on Terminal 9. Failure to mark the wires will make it difficult to connect them correctly later.

6.Dis-connect all wires from the oxygen concentration meter.

7.With a 1/4-in. wrench, remove the nuts from the two lower meter mounting studs (Figure 105).

8.Remove the washers and the meter bracket from the door.

9.Remove the nuts from the two upper meter mounting studs. Note: The upper nuts do not have washers.

10.Pull the complete meter assembly out of the front of the door.

Form No. 702718 Rev. A March, 2005

93

Page 104 Page 106
Page 105
Image 105
Suburban Mfg 12019-01-NGFREP manual Oxygen Concentration Meter Wire Connections
Page 104 Page 106

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents