Owner’s Manual - Regal Intensive Care Unit

3.Pass the connectors and wires through the knurled ring and screw the ring firmly onto the button body until holds the button tightly onto the door.

4.Locate the remaining gray wire that you cut off the system light in Step 8 above.

5.Strip off about 1/2-in. of the insulation from the end of the wire, leaving the bare metal strands exposed.

6.Twist the bare metal strands of this wire together with the strands from the gray wire on the new button assembly.

7.Place a new spade connector onto the two wires and, with a wire crimping took, firmly crimp the connector to the wires. Tug on the connection to make sure it is tight and secure.

8.Connect this spade connector to the rear of the system light (Figures 114 and 115).

9.Plug the connector on the green and white wires onto Terminal 4 on the temperature control assembly.

10.Plug the connector on the green wire onto Terminal 6 on the temperature control assembly.

11.Plug the connector on the red wire to the side terminal on the fuse holder.

12.Close and secure the electronics compartment door.

13.Plug the power cord into its wall outlet.

Form No. 702718 Rev. A March, 2005

103

Page 114 Page 116
Page 115
Image 115
Suburban Mfg 12019-01-NGFREP manual Form No Rev. a March 103
Page 114 Page 116

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents