Chapter 5 - Repairs & Replacements

Seal, IV Port

P/N 752100

There are four IV ports on the Intensive Care Unit; two over each half-size compartment. Each IV port consists of a seal, a seal retainer, two retaining screws, and two locknuts. All four IVport seals are identical and are removed and installed the same way.

Tools Required

„11/32-in. wrench

„Phillips screwdriver

Removal

1.Open both animal compartment doors.

2.Use a 11/32-in. wrench and a Phillips screwdriver to remove the two cap screws that hold the seal retainer in place (Figure 91) and remove the retainer from the unit.

3.Remove the IV Seal from the unit.

Installation

Note: On the seal and seal retainer, the mounting holes are closer to the top edge than to the bottom edge (Figure 92).

1.Place the IV seal behind the IV port opening with the short side on top.

2.Hold the seal retainer in place, flanges outward, over the seal and secure with the two cap screws and locknuts.

3.Close the doors.

Cap Screws

Cap

Seal

 

Screws

 

Nuts

Short

 

 

Long

Seal

Retainer

Figure 91. Removing the IV Port

Figure 92. Parts of the IV Port

82

SSCI - Suburban Surgical Company, Inc.

Page 93 Page 95
Page 94
Image 94
Suburban Mfg 12019-01-NGFREP manual Seal, IV Port, Removing the IV Port
Page 93 Page 95

12019-01-NGFREP specifications

Suburban Mfg 12019-01-NGFREP is a well-regarded water heater that stands out in the market for its reliability and efficiency. Designed with the modern consumer in mind, it caters effectively to both residential and light commercial applications. This water heater is particularly recognized for its robust construction, versatile installation options, and advanced technological features.

One of the key attributes of the Suburban Mfg 12019-01-NGFREP is its high-efficiency operation. It is equipped with a state-of-the-art heating system that maximizes energy utilization while minimizing waste. This efficiency not only contributes to cost savings in utility bills but also supports environmentally friendly practices by reducing carbon footprints. The water heater operates with a powerful 6-gallon capacity tank, ensuring that households have a steady and ample supply of hot water.

Another main feature contributing to its popularity is the dual-fuel technology. This model can operate on both electric and gas power sources, providing flexibility to users in selecting their preferred energy type. This attribute is especially beneficial in areas prone to power outages or where energy prices fluctuate.

The design of the Suburban 12019-01-NGFREP also reflects user convenience. It is compact and lightweight, which simplifies the installation process, allowing it to fit into tight spaces, making it an ideal solution for mobile homes, RVs, or smaller residential units. The unit is also built with durable materials, protecting it against corrosion and wear over time, thus enhancing its longevity and performance.

Another significant aspect of the Suburban Mfg water heater is its safety features. It comes equipped with an automatic shut-off valve that activates in case of overheating, ensuring protection for both the unit and the occupants. Additionally, it incorporates pressure relief mechanisms to further enhance safety, making it a dependable choice for consumers.

Moreover, the unit’s ease of maintenance is a valued characteristic. It provides accessible design elements that simplify routine checks and repairs, saving users time and effort when servicing the water heater.

In summary, Suburban Mfg 12019-01-NGFREP is a versatile, efficient, and reliable water heater that is tailored to meet modern demands. Its combination of dual-fuel operation, high energy efficiency, compact design, and safety features makes it a smart investment for households seeking comfort and performance in their water heating solutions.
Top Page Image Contents