20 en Troubleshooting | WZ16 Integrated IR Bullet Camera |
|
|
5Troubleshooting
5.1Troubleshooting Tips
Before sending the camera out for repair, check the items below. If the problem persists after checking these items, contact your service center.
-If no image appears, verify that:
–The coaxial cable is attached securely.
–The power and voltage are normal.
–There is adequate illumination.
-If the image is unclear, verify that:
– The lens is in focus.
– The lens is not dirty. Dirt or fingerprints on the lens can adversely affect the images. Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning paper and cleaning fluid (available commercially).
– The monitor is adjusted correctly.
1.0 2011.02 | Installation Manual | Bosch Security Systems, Inc. |
