TROUBLESHOOTING
Before sending the camera out for repair, check the items below. If the problem persists after checking these items, contact your service center.
■If no image appears.
Is the coaxial cable attached securely? Are the power and voltage normal?
Has the exposure/iris of the camera been adjusted correctly (within the OSD menu) ? Is there adequate illumination?
■If the image is unclear
Is the lens in focus? Is the lens dirty?
Dirt of fingerprints on the lens can adversely affect the images. Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning paper and cleaning fluid (commercially available).
Is the monitor adjusted correctly?
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
