Bosch Power Tools 0 601 617 061, 1617, 1618EVS Edgeforming Dust Extraction Hood, M4 x 16mm, Screw

BM 2610925542 07-06.qxp 7/24/06 12:06 PM Page 20

EDGEFORMING DUST

EXTRACTION HOOD

Do not reach in area of the ! WARNING bit while the router is ON

or plugged in. To avoid entangling hoses, do not use this dust extraction hood at the same time as any other dust extraction hood.

This dust extraction hood (optional accessory) is used for dust collection when edge-forming (Fig. 24).

ATTACHING DUST EXTRACTION HOOD You can attach the edge-forming hood in several places according to your needs or preferences. This hood is attached using two of the screw holes on the router base that are used to attach the router’s sub-base. Choose the desired location for the hood. Loosen and take out the two screws from the router base and attach the dust extraction hood — over the router’s sub-base — using the screws provided with the hood. Securely tighten the screws. (Figures 25 & 26).

FIG. 24

ROUTER

SUB-BASE

WORKPIECE

EDGE

DUST

EXTRACTION

HOOD

M4 x 16mm

SCREW

FIG. 26

OTHER BASES

M4 x 16mm

SCREW

FIG. 25	M4 x 16mm
PLUNGE BASE	SCREW

DUST

EXTRACTION

HOOD

DUST

EXTRACTION

HOOD

SUB-BASE	M4 x 16mm
	SCREW

-20-