BM 2610925542
FIG. 27
BASE 
CUT
M6 WING
SCREW
DESIRED | WORKPIECE | |
WIDTH | ||
|
FEED
DIRECTION
| M6 WING SCREW |
| FINE |
| ADJUSTMENT |
| INDICATOR |
| ROUTER |
| GUIDE |
FINE | RODS |
| |
ADJUSTMENT | |
KNOB |
|
DELUXE ROUTER GUIDE
(Not included, available as accessory)
The Bosch deluxe router guide is an optional accessory that will guide the router parallel to a straight edge or allow you to create circles and arcs.
The deluxe router guide is supplied with two rods and screws to fasten the guide (Fig. 27). In addition, it features a fine adjustment knob and indicator for accurately positioning the edge guide relative to the bit. With the guide installed and adjusted, the router should be
fed normally, keeping the guide in contact with the edge of the workpiece at all times. The deluxe router guide may also be positioned directly under the router base for operations where a cut is needed close to or at the edge of the work.
The deluxe router guide includes a dust extraction hood and the VAC002 vacuum hose adapter.
For complete instructions on installation and operation, please refer to the instructions which are included with this accessory.
USE IN ROUTER TABLE
Your router can also be used in a router table. The RA1161 fixed base is designed to allow easy depth adjustment in a table. The RA1162 "D"
! CAUTION | The RA1166 Plunge Base is |
| not recommended for use |
|
in a router table. Damage to plunge router base may occur.
To eliminate the hassle of installing your router’s own base on the router table and later having to convert it back for
FIG. 28
| Hex |
Wrench | |
Mounting |
|
Plate |
|
| Hole for Hex |
| Wrench |
Shown after | |
clamp lever | |
and depth | subbase has |
adjustment | been removed |
controls should |
|
face the front of the router table |
|
