Bosch Power Tools 1994-6D TYPE 27, 28 & 29 GRINDING, ABRASIVE TYPE 1A & 27A WHEEL ASSEMBLY, Wheel

BM 1609929T61 07-09:BM 1609929T61 07-09 7/8/09 1:37 PM Page 10

TYPE 27, 28 & 29 GRINDING

WHEEL ASSEMBLY Disconnect tool from power source. Be sure that wheel guard is in place for grinding.

When using mounting wheels, thread BACKING FLANGE all the way down onto spindle, then place GRINDING WHEEL on the spindle. Thread on the lock nut and tighten nut using a lock nut wrench provided with flange kit, while holding the spindle lock in (Fig. 3).

TO REMOVE: Reverse procedure.

When using spin-on grinding wheels, thread directly onto the spindle.

ABRASIVE TYPE 1A & 27A

WHEEL ASSEMBLY

Using the optional type 1A wheel guard, it is possible to perform limited cutting on small stock such as metal tubes, piping or rebar.

Do not attempt to cut large stock or sheets of metal as this tool is not designed to be a dedicated cutting tool.

	Always use type 1A protection
! WARNING
	guard for cutting.

Disconnect tool from power source. Be sure that wheel guard is in place for cutting.

When using mounting wheels, thread BACKING FLANGE all the way down onto spindle, then place GRINDING WHEEL on the spindle. Thread on the lock nut and tighten nut using a lock nut wrench provided with flange kit, while holding the spindle lock in (Fig. 4).

TO REMOVE: Reverse procedure.

TYPE 1 ABRASIVE

STRAIGHT GRINDING WHEELS

Do not use type 1 abrasive ! WARNING wheels designed for

straight/die grinding. This tool is not designed for use with type 1 abrasive straight/die grinding wheels.

FIG. 3

SPINDLE

TYPE 27

SPIN-ON

GRINDING

WHEEL

FIG. 4

		SPINDLE
		TYPE 1A
		WHEEL GUARD
TYPE 27
WHEEL GUARD
BACKING		BACKING
FLANGE		FLANGE
TYPE 27
GRINDING
WHEEL		LOCK NUT
LOCK NUT	TYPE 1A	TYPE 27A

WHEEL WHEEL

-10-