Bosch Power Tools PS50-2AB, PS50-2C, PS50B Selecting Accessories, Accessory Material Application

BM 2609140575 07-08 7/8/08 3:54 PM Page 10

Selecting Accessories

Accessory	Material	Application
BIM segment	Hard and soft wood,	Separating and plunge cuts; also for
saw blade	plastic, non-ferrous	sawing close to edges, in corners and
	metals	hard to reach areas;
		Example: shortening already installed
		bottom rails or door hinges, plunge
		cuts for adjusting floor panels.
HCS plunge	Wooden materials,	Separating and deep plunge cuts; also
cut saw	plastic, gypsum and	for sawing close to edges, in corners
blade	other soft materials	and hard to reach areas;
		Example: Sawing off water pipes
		(PVC) or cable ducts flush against
		walls, floors or ceilings.
BIM plunge	Hard and soft wood,	Smaller separating and plunge cuts;
cut saw	metal (e.g., nails,	Example: Shortening narrow profiles,
blade	screws, small profiles),	cutting fastening elements such as
	non ferrous metals	staples and nails.
HM-Riff	Grouting joints, soft	Cutting and separating close to edges,
Segmented	wall tiles, glass-fibre	in corners or hard to reach areas;
saw blade	reinforced plastic and	Example: Removing grouting joints
	other abrasive	between wall tiles for repair work,
	materials	cutting openings in tiles, gypsum
		boards or plastic.
Rigid scraper	Wooden materials,	Scraping off old coats of varnish or
	plastic, gypsum and	other adhesive, removing bonded
	other soft materials	carpeting, e.g., on stairs/steps or other
		small/medium-sized surfaces.
Flexible	Silicone and other	Removal of putty or other softer
scraper	elastic materials	residue from confined areas.
Base plate	Depends on sanding	Sanding surfaces close to edges, in
for sanding	sheet	corners or hard to reach areas;
		Depending on the sanding sheet for,
		e.g., sanding wood, paint, varnish,
		stone, glass.

Optional Accessories

-10-