RZ 2610917368
REMOVING AND INSTALLING
THE SOFT HANDLE (New Style)
1 Depress and hold top clip release (Fig. 7).
2 Pull strap away from tool (Fig. 7).
While top clip hook release is depressed, pull handle strap straight away from tool (Fig. 7).
3 Squeeze from each side and hold both bottom clip releases (Fig. 8).
4 Lift the back of the clip up and away from tool (Fig. 8).
While depressing both bottom clip release tabs, lift the back of the clip away from the tool (Fig.8).
FIG. 7
FIG. 8
TOP CLIP | BOTTOM |
CLIP |
ATTACHING CIRCLE CUTTING GUIDE (Not included, available as accessory)
Your tool is equipped with a circle cutting guide that can easily be attached directly to the depth guide, or the optional dust hood accessory.
1.To attach, position adapter plate and circle guide as shown and snap into depth guide or dust hood as shown (Fig. 9).
2.To remove, simply lift tab on depth guide and remove circle guide and adapter plate.
This attachment allows you to cut perfect circles from 3.5 to 12” in diameter using your Bosch power tool.
Loosen pivot knob and slide to desired diameter of hole to be cut. Line up knob with diameter size of circle you wish to cut.
For English (IN), use the scale on the side of the metal rule. For metric (CM) use the scale the opposite side of the metal rule.
Start cutting in a clockwise direction using consistent moderate pressure. If you need to reposition your hands, back tool off work slightly, in a counter clockwise direction. Re- start cutting in a clockwise direction.
Continue cutting your circle until you have cut the complete shape, and turn off tool.
ROUND |
| DEPTH | |
KNOB | TAB | ||
GUIDE | |||
|
| ||
FIG. 9 | PIVOT KNOB | ADAPTER | |
| PLATE | ||
|
| CIRCLE | |
|
| CUTTING | |
|
| GUIDE | |
|
| METAL RULE |
