-13-
Step 6
Move the Zip Bit right and upward maintaining
light continuous pressure toward the box.
Step 7
Round the right bottom corner and begin
moving the bit upward while applying light
pressure left toward the box until you meet
initial upward cut. Push Spiral Saw power tool
switch to off.
Step 8
The completed box, executed quickly, neatly
and in a fraction of the time taken by other
methods.
These step-by-step instructions are
generalized to acquaint you with the Spiral
Saw power tool operation. After some
practice, you may develop a motion
technique with which you are more
comfortable. However, you must always
begin the cut somewhat centrally, and MOVE
THE SPIRAL SAW POWER TOOL ONLY
COUNTERCLOCKWISE to take advantage
of the “hugging” action of the rotating Zip Bit
along the contours of the template.
Remember to use a smooth continuous
motion.
RZ 2610917368 9-04 10/1/04 8:09 AM Page 13