SYSTEM SETUP
C.Place the Acoustimass® module according to the following guidelines:
•For best sound quality, stand the Acoustimass module on its feet along the same wall as your TV, or along any other wall in the front third of the room.
•The front opening of the module can face any direction.
•Make sure there is an AC outlet nearby.
Acoustimass module
CAUTION: Do not operate the Acoustimass module on its front end, back end, side, or top.
Note: Be sure to remove all protective films from the Acoustimass module before operating the system. They may affect acoustic performance if left in place.
D.Plug the Acoustimass module power cord into an AC (mains) power outlet.
First time startup
What you need for the following steps:
| AA (IEC LR6) | ADAPTiQ® audio calibration headset |
Remote control | batteries |
Before you start:
•Do not connect any devices to the control console at this time. The instructions provided on your TV will tell you when to do this.
•Make sure the speaker array and Acoustimass module are in their final positions before performing the ADAPTiQ audio calibration.
English – 15
