Operation
Programming the Solo 15 universal remote
You can program the universal remote to control your TV, DVD,
Note: Your device may not be compatible with universal remotes. See your device’s owner’s guide for more information.
Programming your remote to control your TV
1.Power on your TV.
2.Locate the device code for your brand of TV.
Refer to the TV section in the Universal Remote Device Codes book (provided).
3.On the remote, press and
hold 
until all six source buttons glow, then release.
Only 
glows.
4. On the number keypad, enter the code for your brand of TV.
Note: If all six buttons blink three times, you entered an invalid code. Re- peat steps 2 and 3.
5. Press + on the volume button.
6. Point the remote at your TV and
press 
. The TV powers off.
7.Press EXIT to save your settings.
If your TV does not power off
Use the remote’s code scanner to find your TV’s device code.
1.Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled through all codes for your device. To retry the previous code, press - on the volume button.
2.Press 
.
3.Repeat steps 1 and 2 until your TV powers off.
4.Press EXIT to save your settings.
22 - English
