CONTROLLING SOURCES
Changing the source control mode
You can easily switch control from one source to another by pressing the appropriate source button at the top of the remote. In addition to controlling the selected source, the remote will always control the basic speaker functions (on/off, volume, mute) of your CineMate® 1 SR system.
To control a source:
1.Press the power button (
) for the source you want to turn on.
2.Press the button for the source you want to control. The source button will flash to verify your choice.
3.If necessary, Press the TV Input button to select the correct input on your TV.
You may need to press the TV Input button several times in order to select the correct TV input for the source you want to watch.
On some TVs, the TV Input button will display an onscreen menu. Put your Bose remote in the TV control mode to navigate and close this menu.
Note: To control your TV and other devices using the Bose remote, you must first program the remote with a device code for each device. See “Programming the universal remote” on page 4.
Selects the input on your TV to the source you want to watch.
Puts the remote in TV control mode. Allows you to control TV functions, such as channel selection and menu navigation.
Puts the remote in control of your cable or satellite set top box. Allows you to control cable/satellite
Puts the remote in control of your
using.
Puts the remote in VCR control mode. Allows you to control VCR functions, such as play options and menu navigation.
Puts the remote in control of the additional device that does not have a dedicated remote source button. Allows you to control the functions of the source designated as the AUX source.
Source power buttons. Press to turn the corresponding source on or off.
English – 7
