Bose V35/V25, T20/T10, Lifestyle (R) 135, 235/135, Ls 135 manual Care and Maintenance

CARE AND MAINTENANCE

Problem	What to do
TV does not respond to	• Make sure the speaker array is not blocking the IR sensor on the TV.
remote commands	Change the position of the TV and speaker array so that the IR sensor
(135 systems only)	is not blocked.
	• For details on the location of the TV’s IR sensor, refer to the owner’s
	guide that came with your TV.
Picture is blurry when	• Make sure your 3D glasses are tuned on.
viewing 3D content	• If the problem persists, make sure the speaker array is not blocking the
(135 systems only)	IR sensor on the TV. Change the position of the TV and speaker array
	so that the IR sensor is not blocked.
	• For details on the location of the TV’s IR sensor, refer to the owner’s
	guide that came with your TV.
Intermittent bass	• Check that the status indicator on the Acoustimass® module is orange
(135 systems only)	and not blinking.
	• If the speaker array status indicator is blinking orange:
	• Check that the Acoustimass module is plugged into a live AC wall
	outlet and the status indicator is glowing orange.
	• Press the Setup button on the control console and select the
	“Reconnect Acoustimass” menu item. Follow the on-screen
	instructions.
	• Try moving any possible sources of wireless interference, such as a
	wireless computer network router, another wireless device, or a
	microwave oven, further away from the system.
Sound is marred by a loud	• Contact Bose® Customer Service to determine if and how other
hum or buzz, which may	electrical devices in the room may be creating unwanted signals,
be electrical in nature (not	and to obtain possible remedies.
harmonic)
Radio does not work	• Make sure antennas are connected properly.
(Not applicable to T20 and	• Move AM antenna at least 20 inches (50 cm) from the control console
T10 systems.)	and Acoustimass® module.
	• Adjust antenna position to improve reception.
	• Make sure the AM antenna is in an upright position.
	• Move antennas farther from control console, TV, or other electronic
	equipment.
	• Select another station. You may be in an area of weak signal coverage
	for some stations.
FM sound is distorted	• Adjust antenna position to reduce interference.
(Not applicable to T20 and	• Fully extend the FM antenna.
T10 systems.)
Sound is distorted	• Make sure the audio input cable is not damaged and the connections
	are secure on both ends.
	• Reduce the volume output level from any external devices connected
	to the control console.
	• (135 systems only) Remove the protective film from the trim and grille
	on the speaker array and the front of the Acoustimass module.
No sound from a con-	• Check the connections.
nected device	• If using a coaxial or optical audio connection, make sure you have
	not made both types of connections to the same input on the control
	console.
	• Make sure that device is turned on.
	• Refer to the owner’s manual that came with the device.

28 – English