Battery Maintenance, Table of Contents

BATTERY MAINTENANCE

The AD-103 Dial-Alertcomes with 1 battery that at some point you may have to replace:

One	9 volt alkaline battery for the Dial-Alert

Recommendation: Test your Dial-Alertperiodically to ensure that the battery is working.

Dial-Alert Battery

The Dial-Alertcomes equipped with a 9V backup battery in case the electrical power is interrupted for any reason.

When the dialer backup battery is low, the LOBATT. light goes on.

To replace the dialer backup battery:

1. Undo the two screws on the back of the Dial-Alert.

2.Open the Dial-Alertcase by pressing down on the two tabs on the top edge and pull the front forward.

3.Disconnect the old battery.

4.Connect the new battery.

5.Close the Dial-Alertcase and re-insert the two screws.

The battery life, (9 volt alkaline battery), is approximately two years if used only for backup.

TABLE OF CONTENTS
PACKAGE CONTENTS	4
OVERVIEW	5
INSTALLATION	6-8
LIGHTSAND SOUNDS	9
STANDARD PROGRAMMING	10-12
-Recording a Voice Message	10
-Message Playback	11
-Program a Phone Number	11
-Testing	12
-Program a Control Panel	13
OPERATIONS	14
-Receiving a phone call	14
ADVANCED PROGRAMMING	15-17
-Changing Password	15
-Program the Calling Time	15
-Erase programmed Control Panel	16
-Dial Sequence Setting	16
-Universal Dial Tone	17
-Pager Pause Period	17
BATTERY MAINTENANCE	18
-Dial-Alert Battery	18
QUICK GUIDE	19

–18–

–3–