ADVANCED PROGRAMMING

Erase Programmed Control Panel

You may erase the programmed control panel. If you have multiple control panels programmed, you cannot erase a specific control panel, you must erase all the control panels and then program the ones that you would like to keep.

To erase all the control panels, follow the instructions below.

1.Enter the current password (factory default password is 0000), then press [PROG], display will show [P] meaning you are now in programming mode.

2.Enter [6] to erase programmed devices. Display shows [P6 ErASE].

3.Press [ ] to erase all programmed devices.

4.You have erased all the devices if you hear 2 beeps.

Dial Sequence

As mentioned, there is a Redial Count for each phone number, that means when the dialed phone number is busy or cannot be connected, the Dial Alert will dial the number again, or dial another phone number. You may program it so it will finish dialing one phone number with all redial counts, then dial the next number, or you may program it so that it will dial each phone number once, then if they are busy, dial the second attempt.

Example: There are 3 programmed phone numbers and the redial count for these 3 phone numbers are all 3 times.

Dial Sequence 1: Dial each phone number once, then dial each phone number the second time in the same sequence.

i.e. Phone #1, Phone #2, Phone #3, Phone #1, Phone# 2, Phone #3, Phone #1, Phone #2, Phone #3.

Dial Sequence 2: Finish all redial count for the first phone number, then dial the second phone number. i.e. Phone #1, Phone #1, Phone #1, Phone #2, Phone# 2, Phone #2, Phone #3, Phone #3, Phone #3.

The factory default is set to Dial Sequence 2. To change this setting, follow the instructions below.

1.Enter the current password (factory default password is 0000), then press [PROG], display will show [P] meaning you are now in programming mode.

–16–

OVERVIEW

The AD-103 Dial-Alertcan call multiple telephone numbers and sends a personalized pre-recorded message. The person receives the emergency message can confirm receipt of that message by pressing the "#" key on their telephone. A pre-recorded message will be played notifying the person being called of the emergency.

The Dial-Alertis activated when:

1.The red panic button [O] on the keypad of the Dial-Alertis pressed

2.The panic signal from the Control Panel MA-103

This manual is divided into 4 sections in order to assist in the installation and programming your Dial-Alert.

1.Installation

2.Lights and Sounds

3.Standard Programming

-Record a message

-Playback of pre-recorded message

-Storing telephone numbers in memory for

-emergency voice message only

-both emergency voice message and numeric information

-numeric information only

-Delete a telephone number from memory

-Modify the redial count and repeat times of a telephone number

4.Advanced Programming

-Change password

-Programming the calling time

-Programming the pause period

-Program control panel to dialer

-Erase programmed control panel

-Universal Dial Tone

–5–

Page 4 Page 6
Page 5
Image 5
SkyLink ad-103 user manual Overview, Erase Programmed Control Panel, Dial Sequence
Page 4 Page 6

ad-103 specifications

SkyLink AD-103 is an innovative advancement in satellite communication, designed to enhance connectivity in challenging environments. As a part of SkyLink's robust portfolio, the AD-103 stands out due to its unique features, cutting-edge technologies, and extensive capabilities.

One of the main features of the SkyLink AD-103 is its unparalleled signal strength and stability. Utilizing advanced modulation techniques, the AD-103 is capable of achieving high data rates while maintaining a reliable connection even in adverse weather conditions. This is particularly beneficial for industries such as maritime, aviation, and remote operations, where communication can often be compromised by environmental factors.

The SkyLink AD-103 employs the latest in phased array antenna technology. This enables electronic beam steering, allowing the antenna to adjust its signal direction without mechanical movement. This results in faster acquisition times and reduced latency, making it ideal for real-time applications. The high-frequency bands utilized by the AD-103 ensure efficient data transmission with minimal interference, further enhancing its performance.

In terms of connectivity, the AD-103 supports multi-user functionality, allowing several devices to connect simultaneously. This is made possible through its integrated network management system, which intelligently allocates bandwidth and manages traffic. Businesses can optimize their operations, ensuring all users receive adequate connectivity without experiencing bottlenecks.

Moreover, the SkyLink AD-103 is designed with ruggedness and durability in mind. Its compact, lightweight design makes it suitable for both permanent installations and portable use, enabling users to easily transport and deploy it in various locations. The device is built to withstand extreme temperatures and harsh environmental conditions, ensuring reliable performance in any scenario.

Another highlight is its compatibility with multiple protocols, making it a versatile choice for various applications. The AD-103 supports VoIP, video conferencing, and data transfer, catering to diverse communication needs. Integrated security features protect sensitive data, providing peace of mind for users handling confidential information.

In conclusion, the SkyLink AD-103 is a powerful satellite communication tool that combines advanced technology with user-friendly features. Its robust performance, flexibility, and durability make it an essential asset for industries requiring reliable communication in remote and challenging environments. As the demand for seamless connectivity continues to grow, the SkyLink AD-103 is poised to meet these challenges head-on, paving the way for enhanced global communication.
Top Page Image Contents