INSTALLATION

Speaker On/Off Switch

The speaker must be on during pro- gramming and recording the voice message in order to use the playback feature. For security purposes, the speaker may be turned off after pro- gramming to allow for silent dialing when the dialer is activated.

The On/Off switch for the speaker is located on the lower right corner of the circuit board. The default setting for the speaker is "On".

STANDARD PROGRAMMING

To program additional phone numbers, follow the above procedures by selecting a different phone number locations, from 1 to 9.

You may review a programmed phone number by following the same procedures as programming a phone number. Simply press [ ] when the display shows the current setting instead of entering a new value allows you to keep the programmed setting.

To erase a phone number from the Dial Alert, press [PROG] after step 3 above. That is after you select the phone number (from 1 - 9), Dial Alert will show the programmed phone number. Pressing [PROG] now will delete this phone number from the memory.

TESTING

To test the operation, you may activate dialer by pressing the red panic button [O] on the keypad of the Dial-Alert . AD-103 will dial the pre- programmed phone numbers and playback the voice message.

PROGRAM A CONTROL PANEL (MA-103)

You may use the Dial Alert to notify you when there is a break-in or during a panic situation. You need to program a panic signal from MA-103 Control Panel. To program a Control Panel MA-103 to the Dial Alert first to power up the control panel, follow the instruction below.

1.Enter the current password (factory default password is 0000), then press [PROG]. Display will show [P] meaning you are now in programming mode.

2.Enter [5] which represents programming a Control Panel. You will see [P5 Id codE].

3.Press and hold the “MUTE” button on the MA-103 for 5 seconds. The Control Panel will send a test signal to the Dial Alert.

4.After programming, the display will show ‘rEAdy” indicating it is now in standby mode.

INPUT DC 12V

MUTE

Mute

 

LEARN

 

ALERT

 

CHIME

 

OFF

 

8

13

Page 8
Image 8
SkyLink ad-103 user manual Standard Programming, Testing, Program a Control Panel MA-103

ad-103 specifications

SkyLink AD-103 is an innovative advancement in satellite communication, designed to enhance connectivity in challenging environments. As a part of SkyLink's robust portfolio, the AD-103 stands out due to its unique features, cutting-edge technologies, and extensive capabilities.

One of the main features of the SkyLink AD-103 is its unparalleled signal strength and stability. Utilizing advanced modulation techniques, the AD-103 is capable of achieving high data rates while maintaining a reliable connection even in adverse weather conditions. This is particularly beneficial for industries such as maritime, aviation, and remote operations, where communication can often be compromised by environmental factors.

The SkyLink AD-103 employs the latest in phased array antenna technology. This enables electronic beam steering, allowing the antenna to adjust its signal direction without mechanical movement. This results in faster acquisition times and reduced latency, making it ideal for real-time applications. The high-frequency bands utilized by the AD-103 ensure efficient data transmission with minimal interference, further enhancing its performance.

In terms of connectivity, the AD-103 supports multi-user functionality, allowing several devices to connect simultaneously. This is made possible through its integrated network management system, which intelligently allocates bandwidth and manages traffic. Businesses can optimize their operations, ensuring all users receive adequate connectivity without experiencing bottlenecks.

Moreover, the SkyLink AD-103 is designed with ruggedness and durability in mind. Its compact, lightweight design makes it suitable for both permanent installations and portable use, enabling users to easily transport and deploy it in various locations. The device is built to withstand extreme temperatures and harsh environmental conditions, ensuring reliable performance in any scenario.

Another highlight is its compatibility with multiple protocols, making it a versatile choice for various applications. The AD-103 supports VoIP, video conferencing, and data transfer, catering to diverse communication needs. Integrated security features protect sensitive data, providing peace of mind for users handling confidential information.

In conclusion, the SkyLink AD-103 is a powerful satellite communication tool that combines advanced technology with user-friendly features. Its robust performance, flexibility, and durability make it an essential asset for industries requiring reliable communication in remote and challenging environments. As the demand for seamless connectivity continues to grow, the SkyLink AD-103 is poised to meet these challenges head-on, paving the way for enhanced global communication.