OPERATIONS

When the display shows “rEAdy”, that means the unit is in standby mode. It will dial when it receives a panic signal from the alarm panel, or its own panic button is pressed.

It will dial the programmed phone numbers and playback the voice message.

Once the display shows “rEAdy”, the AD-103 will respond if it receives a command to dial out.

RECEIVING A PHONE CALL

When the dialer is activated, it will call the pre-programmed phone numbers and playback the message.

The recipient can take the following actions after listening to the voice message.

1. To stop the call from calling a specific phone number.

Since there is a redial count and regardless of whether the call is picked up or not, it will redial based on the redial counts. If the redial count is set to 3 times, that means it will call that phone number 3 times. If the recipient acknowledges the call and does not want it to call the same number again, he / she can enter [#]. This will stop the Dial Alert from calling this same phone number again and it will dial the rest of the other programmed phone numbers.

2. To stop the call from calling all phone numbers.

Usually you will setup the Dial Alert to call yourself (the home owner) as the first phone number. It is likely that if you acknowledge the call, you do not need to call the rest of the phone numbers. If so, you can enter the 4- digit password so the Dial Alert will not dial any other phone number and return to standby mode.

–14–

INSTALLATION

2.Thread the telephone line through the top hole in the back of the unit and plug it into the "LINE" jack. If you want to have an answering machine on the same line as the dialer, thread the phone line through the bottom hole in the back of the unit and plug it into the "PHONE" jack of the dialer. The phone line(s) must be inserted through the back of the unit before it is attached to the wall.

3.Thread the AC adapter cord through the top hole in the back of the unit and plug it into the AC connector on the circuit board as shown. The adapter cord must be inserted through the back of the unit beforeit is attached to the wall.

4.Insert the 9 volt battery and rotate the antenna from the inside of the dialer to the outside.

5.Firmly close the case. Insert and secure the two screws to the bottom case near the two tabs.

6.Using the template provided, insert the two screws into the wall.

7.Gently hang the Dial-Alertto these two screws.

8.Plug the other end of the telephone cord into a telephone jack. Plug the AC adapter into a power outlet. The red AC PWR light will turn on and the keypad backlight will be on.

NOTE: After installation, please use two screws (included) to fix the front and back case together before hanging on to the wall. (When you open the case, please remove the AC adapter and the phone line from the wall outlet).

–7–

Page 6 Page 8
Page 7
Image 7
SkyLink ad-103 user manual Operations, Receiving a Phone Call
Page 6 Page 8

ad-103 specifications

SkyLink AD-103 is an innovative advancement in satellite communication, designed to enhance connectivity in challenging environments. As a part of SkyLink's robust portfolio, the AD-103 stands out due to its unique features, cutting-edge technologies, and extensive capabilities.

One of the main features of the SkyLink AD-103 is its unparalleled signal strength and stability. Utilizing advanced modulation techniques, the AD-103 is capable of achieving high data rates while maintaining a reliable connection even in adverse weather conditions. This is particularly beneficial for industries such as maritime, aviation, and remote operations, where communication can often be compromised by environmental factors.

The SkyLink AD-103 employs the latest in phased array antenna technology. This enables electronic beam steering, allowing the antenna to adjust its signal direction without mechanical movement. This results in faster acquisition times and reduced latency, making it ideal for real-time applications. The high-frequency bands utilized by the AD-103 ensure efficient data transmission with minimal interference, further enhancing its performance.

In terms of connectivity, the AD-103 supports multi-user functionality, allowing several devices to connect simultaneously. This is made possible through its integrated network management system, which intelligently allocates bandwidth and manages traffic. Businesses can optimize their operations, ensuring all users receive adequate connectivity without experiencing bottlenecks.

Moreover, the SkyLink AD-103 is designed with ruggedness and durability in mind. Its compact, lightweight design makes it suitable for both permanent installations and portable use, enabling users to easily transport and deploy it in various locations. The device is built to withstand extreme temperatures and harsh environmental conditions, ensuring reliable performance in any scenario.

Another highlight is its compatibility with multiple protocols, making it a versatile choice for various applications. The AD-103 supports VoIP, video conferencing, and data transfer, catering to diverse communication needs. Integrated security features protect sensitive data, providing peace of mind for users handling confidential information.

In conclusion, the SkyLink AD-103 is a powerful satellite communication tool that combines advanced technology with user-friendly features. Its robust performance, flexibility, and durability make it an essential asset for industries requiring reliable communication in remote and challenging environments. As the demand for seamless connectivity continues to grow, the SkyLink AD-103 is poised to meet these challenges head-on, paving the way for enhanced global communication.
Top Page Image Contents